Thread: Indicators stopped working

G'day Mike,

I'm not sure if this will be of help to you or not as i don't know what a TD5 dash area really looks like, but the flasher unit in my County is mounted on the inside of a large metal bracket that is behind a plastic panel situated below the dash and in front of the gear stick.

Had a look there.. didn't find anything that looked like a flasher.. could be anywere.. i have been looking in the defender manual, and it shows it behinded the dash.. had a look and there is only one relay and a box. looks nothing like the pic. I the maual i have is for the later 2002 defenders.

this one has me stumped. at the moment im going thought the net looking for wiring diagrams.. if i have no luck tonight ill just follow the wires from the stalk till i find the flasher.

Hi Mike,
dont know the 99 at all but in the TDi its on the fuse panel (behind the gear lever behind the plastic fuse cover)on the right hand side of the that, there are 2 square what look like relay units, one is the hazards and the other by memory is yellow? and is the flasher unit.
hopes this helps.
Mal

Originally Posted by I Love My Landy!

G'day Mike,

I'm not sure if this will be of help to you or not as i don't know what a TD5 dash area really looks like, but the flasher unit in my County is mounted on the inside of a large metal bracket that is behind a plastic panel situated below the dash and in front of the gear stick.

This is correct.

Its the second one from the NS behind the metal bracket, behind the plastic cover

prc8876

ETA on mine its black Mal.

Thanks guys.. had another play today.. FOUND THE FAULT

I turned the idicators on and started to wiggle hit swear at any bit that had LUCAS on it i could find, Gave the red one behind the fuse box a tap, right where you said.. came good.. started to put it all together and found that they stopped working once i wiggled the hazard light switch..

So i belive either the flasher or the switch is the problem.. Pulled the switch apart to give it a clean, doesn't look real flash in there. The hazard light switch isolates the normal indicators. This bit was bent.

So i went off the the landrover shop to get some parts.

the switch was VERY EXPENSIVE as in 180+ so i thought ill do a bit more research. Just found the switch on ebay for 15quid.. ill wait a week. and save 100!! thats $100 closer to that set of bilsteins i've wanted for ages!!

Flasher wasnt' that expencvie its on its way....

I would hate to think how much this would have cost me if i had of just gorn to a dealer or mechanic and said "fix it" im guessing $400+

Thanks guys