Results 1 to 5 of 5

Thread: 110 tdi rear wheel oil leak

  1. 9th December 2009, 04:39 PM #1
    jx2mad's Avatar
    jx2mad
    jx2mad is offline ForumSage Subscriber
    Join Date
    Jan 1970
    Location
    Sussex Inlet. N.S.W.
    Posts
    6,908
    Total Downloaded
    0

    110 tdi rear wheel oil leak

    I have a slight oil leak from my right rear wheel. Two problems were suggester; blocked breather or oil seal. The breather is fine, not blocked. the rear wheels have new hubs due to thin rotors and new oil seals. This problem was evident before I changes hubs etc. I feel this only leaves a marked seat where the oil seal runs. I also believe this can be sleeved. Is this possible and where are these sleeves available from? Jim
    Jim VK2MAD
    -------------------------
    '17 Isuzu D-Max
    Reply With Quote Reply With Quote
  2. 9th December 2009, 06:42 PM #2
    jx2mad's Avatar
    jx2mad
    jx2mad is offline ForumSage Subscriber
    Join Date
    Jan 1970
    Location
    Sussex Inlet. N.S.W.
    Posts
    6,908
    Total Downloaded
    0

    110 tdi rear wheel oil leak

    ok all. This problem MUST have popped up for someone in the past!!! Jim
    Jim VK2MAD
    -------------------------
    '17 Isuzu D-Max
    Reply With Quote Reply With Quote
  3. 9th December 2009, 08:10 PM #3
    abaddonxi's Avatar
    abaddonxi
    abaddonxi is offline Moderator
    Join Date
    Jan 1970
    Location
    2780
    Posts
    8,257
    Total Downloaded
    0
    Called speedi-sleeves -http://www.sealcom.com.au/CR.htm

    Try a bearing place.
    Reply With Quote Reply With Quote
  4. 10th December 2009, 06:23 PM #4
    MinniTheMoocha's Avatar
    MinniTheMoocha
    MinniTheMoocha is offline Master
    Join Date
    Jul 2007
    Location
    Melbourne, VIC
    Posts
    429
    Total Downloaded
    0

    Was it seated right?

    Was the seal seated correctly?

    It needs to be 4-4.5mm down from the edge of the hub.
    Reply With Quote Reply With Quote
  5. 10th December 2009, 11:43 PM #5
    nice1guv's Avatar
    nice1guv
    nice1guv is offline Wizard
    Join Date
    Aug 2008
    Location
    Perth
    Posts
    1,209
    Total Downloaded
    0
    Quote Originally Posted by jx2mad View Post
    The breather is fine, not blocked.
    Are you sure it is clear?

    My rear one was blocked at the banjo fitting on the diff.
    Reply With Quote Reply With Quote
« Washer jet - Replacement/removal | 7 seat Defender »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!