Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: 4wdsupacentre solar blanket

  1. #11
    DiscoMick Guest
    Thanks, I did know that having the solar on the roof wouldn't increase what the alternator was doing when driving, particularly since my Defender's alternator isn't 'smart', but just operates at a fixed rate. However, I didn't say it well. Your explanation did explain it much better than I could have, so thanks for clarifying it.

  2. #12
    Join Date
    Jun 2013
    Location
    Warner Area - SEQ
    Posts
    1,924
    Total Downloaded
    0
    Re: The Difference between a MPPT and PWM

    I might be wrong here but I thought the main difference between the 2 is efficiency. The MPPT is more efficient than the PWM and therefore u would get more out of your solar Panels..... The MPPT is usually more expensive but it may pay for itself over time too through time saved in charging your systems up.....

    There is some useful reading here: MPPT vs PWM Solar Controllers

    or this one:
    Which solar charge controller: PWM or MPPT?

  3. #13
    DiscoMick Guest
    I'm not convinced that MPPT controllers have enough advantages to justify the extra cost. My PWM controllers do everything I need.

  4. #14
    Join Date
    Apr 2009
    Location
    Crafers West South Australia
    Posts
    11,732
    Total Downloaded
    0
    Quote Originally Posted by Robmacca View Post
    Re: The Difference between a MPPT and PWM

    I might be wrong here but I thought the main difference between the 2 is efficiency. The MPPT is more efficient than the PWM and therefore u would get more out of your solar Panels..... The MPPT is usually more expensive but it may pay for itself over time too through time saved in charging your systems up.....

    There is some useful reading here: MPPT vs PWM Solar Controllers

    or this one:
    Which solar charge controller: PWM or MPPT?
    The big difference between the two regulator types is what happens to the input voltage to the regulator. A MPPT controller will allow the panel voltage to climb well above battery voltage, then use a DC-DC converter to take the slightly lower amps and much higher voltage and produce higher amps at the battery charging voltage. This means you can efficiently use 24V panel sets to charge both 12V and 24V batteries as the regular adjusts everything automatically. You can use lighter cabling with two series panels than a parallel pair and lose less power.

    PWM regulators are simply wasteful of potential charging power by limiting regulator input voltage to battery voltage plus regulator voltage loss, which is much lower than the rated max power output voltage of the panel.

    But if your set up does what you need, it's fine. Wait for a MPPT regulator to turn up on special if you want a few more amps without carrying more panels.

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!