just checked it....
not the setup the inspired my initial curiosity to the concept.
Dunsfold Collection
Found it
just checked it....
not the setup the inspired my initial curiosity to the concept.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
I have a somewhat different plan.
Remove gearbox and engine.
Fit a large electric motor to the TC - with ratios capable of a top speed of 90-110ish.
Rather than batteries, a couple of VERY large capacitors (or possible batteries instead), and a small, efficient diesel generator mounted somewhere.
So you have a vehicle capable of the same speed, acceleration and range as the original. But with Max torque from stationary.
Overall fuel consumption should be reduced, as no idling, smaller, more efficient diesel, etc etc...
 Master
					
					
						Master
					
					
                                        
					
					
						google super capacitors
I think that is along the right lines. Advantage of supercapacitors is that they allow regenerative braking to be effective.
The whole problem though with this sort of setup, is that you have, in the generator to motor effectively an automatic transmission. With losses of probably 15-25%. This makes an automatic look efficient! To finish up ahead, you have save that 15-25% in increased efficiency of the small diesel and no idling before you start making any gains. I'm not saying it can't be done, but there are good reasons why diesel-electric transmissions have only caught on in general in railway locomotives where the advantages of a simple drive to all wheels and stepless drive outweighs the loss in efficiency.
I'm not saying it can't be done, but I suspect the advantages will be pretty illusory by the time you take into account the losses and the extra weight of generator, electric motor and batteries/capacitors. This is one of the reasons this sort of setup often has motors in the hubs - by scrapping the whole drive train you can get ahead of the game. But I am not sure that is a good idea in an offroad vehicle.
John
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
my back of the napkin maths had me believing that keeping the gearbox allowed you to use a significantly smaller motor with a smaller generation plant that operated at about peak fuel economy using the batteries as a capacitor setup you could come away with good economy when you had to run the charging plant and providing you kept your runs to within battery range almost no cost if you charged up on off peak power.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Dave, and others interested in this subject, you might find the article in the June 2009 Silicon Chip magazine of interest. In particular they discuss the type of motor to be used etc. This was for a pure electric car, but a lot of the information would apply to a hybrid.
John
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
 Master
					
					
						Master
					
					
                                        
					
					
						maybe wait until these things are available s/h with dead batteries
http://www.vectrix.com/
20hp brushless motor and controller with integrated regenative braking system.
I'm sure you could work out a simple mod to kick the regen system in when the charge is low and you'd have a pretty much off the shelf system to hybrid your landy
I like your thinking.
That and a few Lithium Ion batteries (for shunting traffic type work) and a super capacitor to take advantage of the re-gen braking and it would be a pretty good KERS type system, imagine when over taking up hill how well 20hp extra would go down
I recon that I could probably get out of it for $10k or close to it...
Still, would be a nice gimmick
 Master
					
					
						Master
					
					
                                        
					
					
						this is an awesome discussion. I had a go on a vextrix not long ago, it is aweosme and has regen braking if you rotate the throttle backwards past neutral. I also built a couple of fast electric bikes, 0-100 around 3 secs. Range roughly 10km. Could not beat it on the track due to max torque at 0 rpm out of the corners.
Anyway this has got me thinking, I have a few ideas too but the PTO never entered my mind.
One idea is you get an awd car like an L series subaru, put a FWD box in it and motor through the floor to the rear diff. Then you have hybrid. BTW range is almost never a problem. I used to ride my elec bike on the street and never had a range problem for local area stuff. Sometimes local k's makes up a lot of your weekly k's. Also whenever you get to work/home you can recharge it, even a short time charging makes a big difference.
You dont need to mount wheel motors, you can mount a motor directly into a diff. Also an auto tranny makes no sense because of inefficiency and also I think you may need to keep it spinning to keep the hydro pressure up. You just mount a motor directly into a manual box, keep the clutch and ratios, the space you save from no motor and all that allows you to have a 30km range which means you can get a cheap manual LR with a clapped out engine, put cheap lead acids in it and a short range and have very cheap local area motoring. A proper car electric motor new is around 1k.
Add to this you never need to fill up, no oil changes, maybe regen braking for less brake pad wear, and first thing on a cold morning just flogg the hell out of it from the drive way. It makes a lot of sense.
What I REALLY want to know is can a stock R380 box and L322 transfer case accept a drive input anywhere without a PTO?
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks