Sals rear (disc brake version)

[uninformed]

hey all,

first off, im looking for a bare Sals Disc rear housing.

second, does anyone have an exploded diagram of the rear axle flange/stub axle/hub/brake assembly?

does anyone know the thickness of the flange on the end of axle case?

cheers,
Serg

[isuzurover]

AFAIK the 110 drum housings are the same. The difference is in the hubs and stubs. I can measure a drum housing if you want?

[rar110]

I am planning on doing a disc conversion on a sals axle. A forum member kindly gave me a copy of the parts diagram for the army 110s. The only difference was the part no for the hub which is now unavailabe. I was going to try using the original hub. The uk wolf disc conversion is another option.

[uninformed]

AFAIK the 110 drum housings are the same. The difference is in the hubs and stubs. I can measure a drum housing if you want?

thanks Ben,

dimensions would be great, if you have a bare housing there, could you take some pics of the end flange. side on and end on to show inside the axle tube

cheers,
Serg

[DeeJay]

This might be of help..

Drum brake 110 salisbury disc brake conversion - LR4x4 - The Land Rover Forum (http://forums.lr4x4.com/index.php'showtopic=11685)

Easy enough to sign in - good tutorial:)

[uninformed]

thanks DeeJay,

good pics there for me and will help those doing the disc conversion

cheers,
Serg

[isuzurover]

thanks Ben,

dimensions would be great, if you have a bare housing there, could you take some pics of the end flange. side on and end on to show inside the axle tube

cheers,
Serg

This is a series sals, but I am 99% sure they are the same.
https://www.aulro.com/afvb/
https://www.aulro.com/afvb/

Flange OD: 131.5 mm
8 mm thick
Tube: 80 mm OD throughout (series and 110)
67 mm ID at flange - but only 5.6 mm wall in middle - maybe tapered?

Disc converted 110 sals. Will take measurements on w-end if different.
https://www.aulro.com/afvb/

[uninformed]

thanks Ben,

thats what Ive been looking for.

Serg