View Full Version : Defender Stud Pattern
VladTepes
20th July 2010, 09:18 AM
I've got some standard tubed rims from my 1995 130 Defender twin cab and the question has arisen.. will these fiot ANY model Defender (eg all models).
 
What about a 2000 model specifically ?
 
I'm pretty sure I know the answer but I want someone who ACTUALLY knows to say so.
 
Cheers
p38arover
20th July 2010, 09:39 AM
Vlad, Vlad, Vlad!
 
The Good Oil is your friend.
 
Defenders still use the tried and true 5 studs on a 6.5 inch PCD.
juddy
20th July 2010, 10:25 AM
Further info for you...
All 90/110 wheels are 33mm, only the latest XD/Wolf type are 20.6mm
ANR4636PM are Standard 5.5F x16 wheels for 90/110 are welded construction in primer finish, the earlier NRC7578 were rivetted construction.
ANR1543PM are 6.5L x 16 heavy duty rivtted construction
ANR5593PM are 6.5J x 16 x 20.6mm XD/Wolf are welded construction, or ANR4583PM rivetted construction
ANR5593PM is the tubed version of the Wolf rim.
ANR1534PM (20.6 Offset) is listed as One Ton rim .They are only suitable for tubed tyre usage.They are an inch wider with that extra inch going on the outside (ie it looks like a wider standard 110 steel wheel) with slightly less offset than the 5.5 inch wheels
272309 is an old 109 wheel. They are 5.5″ wide with a different offset than the anr4636.
(5.5 inch rims have 33mm of offset, the 6.5 inch rims have 20.6mm of offset).
————
Tubeless.
ANR4583PM 6.5J x 16 130 and Wolf XD
NTC5193PM 7.0 x 16 Discovery
Tubed.
NRC7578PM 5.5F x 16 (riveted centre) 90 and 110
ANR4636PM 5.5F x 16 (welded centre) 90 and 110
NTC4135PM 6.0J x 16 (riveted centre) 90 only
ANR4635PM 6.0J x 16 (welded centre) 90 only
ANR1534PM 6.5L x 16 HD 110 and 130
ANR5593PM 6.5J x 16 130 and Wolf XD
—————–
Land Rover Wheel Sizes
Model Rim Dia Width Offset Part#
88 ‘59 thru ‘67 16″ 5″ 1″ 231601PM
88 ‘67 thru ‘74 15″ 6″ 1″ NLA
109 ‘59 thru ‘71 16″ 5.5″ 1.75″ 272309
109, 90, 110, 88 16″ 5.5″ 2″ NRC7578PM
130, 110 USA 16″ 6.5″ 2.25″ ANR1534PM
——————-
272309 109, offset from rim centre line 1 13/16″ (1.8125″) Road wheel, well base rim type, 5.5″ x 16″
568966 109, offset from rim centre line 1 5/16″ (1.3125″) Road wheel, well base rim type, 5.5″ x 16″
VladTepes
20th July 2010, 11:46 AM
What abloody champion !
rick130
20th July 2010, 10:23 PM
[snip]
ANR5593PM are 6.5J x 16 x 20.6mm XD/Wolf are welded construction, or ANR4583PM rivetted construction
ANR5593PM is the tubed version of the Wolf rim.
FWIW my ANR4583 rim is welded ;)
Looks identical to the ANR5593 except it has a safety bead for tubeless use.
JDNSW
21st July 2010, 06:07 AM
I don't think the above list is strictly accurate in some respects. The distinction for example, as ric130 points out, between rivetted and welded construction is probably not a valid distinction between the part numbers. 
Other points I note are that it specifies 88 Landrovers 1959 -67 when 1959 is not a production change year. In fact, the same wheels were fitted to 88 from 1956. And they did not change to 15" wheels in 1967 - the only 88s sold here with 15" wheels were the Game, and they did not use Landrover wheels.
I suspect the list applies only to a particular market, and that market is not Australia.
John
juddy
21st July 2010, 12:46 PM
I don't think the above list is strictly accurate in some respects. The distinction for example, as ric130 points out, between rivetted and welded construction is probably not a valid distinction between the part numbers. 
Other points I note are that it specifies 88 Landrovers 1959 -67 when 1959 is not a production change year. In fact, the same wheels were fitted to 88 from 1956. And they did not change to 15" wheels in 1967 - the only 88s sold here with 15" wheels were the Game, and they did not use Landrover wheels.
I suspect the list applies only to a particular market, and that market is not Australia.
John
I think you could be right..
abaddonxi
21st July 2010, 08:22 PM
I had a rivetted rim that fouled on the brake caliper.
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.