CraigE
16th September 2011, 09:06 PM
For all those looking at replacement bullbar indicator/clearance lamps, I have just fitted a set of LED Autolamps 175mm. It took a bit of thinking but it is easy to do. Basically I used some 2" x 1" RHS tubing to make a backing spacer as the LEDs are way to thin. I also used 2 large washers on the back of each mounting point to push them out just that little bit further. Not a perfect fit but are ok, some minor gaps around, may look at filling in later.
The only thing I dont like is the LED fascia only clips onto a backing plate. Would have prefered a screw fitting. If they do come loose I guess I can sikaflex or glue them in.
Any way pics of the install.
https://www.aulro.com/afvb/images/imported/2011/09/697.jpg
Installed and working
https://www.aulro.com/afvb/images/imported/2011/09/698.jpg
Backing spacer front view
https://www.aulro.com/afvb/images/imported/2011/09/699.jpg
Backing Spacer back view
https://www.aulro.com/afvb/images/imported/2011/09/700.jpg
Spacer fitted to bar
https://www.aulro.com/afvb/images/imported/2011/09/701.jpg
https://www.aulro.com/afvb/images/imported/2011/09/702.jpg
Plastic backing plate of light
https://www.aulro.com/afvb/images/imported/2011/09/703.jpg
LED light I used
https://www.aulro.com/afvb/images/imported/2011/09/704.jpg
And some Lucidity LEDs for the rear end.
The only thing I dont like is the LED fascia only clips onto a backing plate. Would have prefered a screw fitting. If they do come loose I guess I can sikaflex or glue them in.
Any way pics of the install.
https://www.aulro.com/afvb/images/imported/2011/09/697.jpg
Installed and working
https://www.aulro.com/afvb/images/imported/2011/09/698.jpg
Backing spacer front view
https://www.aulro.com/afvb/images/imported/2011/09/699.jpg
Backing Spacer back view
https://www.aulro.com/afvb/images/imported/2011/09/700.jpg
Spacer fitted to bar
https://www.aulro.com/afvb/images/imported/2011/09/701.jpg
https://www.aulro.com/afvb/images/imported/2011/09/702.jpg
Plastic backing plate of light
https://www.aulro.com/afvb/images/imported/2011/09/703.jpg
LED light I used
https://www.aulro.com/afvb/images/imported/2011/09/704.jpg
And some Lucidity LEDs for the rear end.