View Full Version : army springs
army2a
30th January 2012, 09:34 PM
hey guys, does anyone know if the military springs in a series 2a are standard height or raised, or is the difference in height only from the military shackles. thanks heaps guys
d@rk51d3
30th January 2012, 09:38 PM
Pretty sure the height comes primarily from the shackles.
Although the heavy rating of the springs would keep them sitting up too.
isuzurover
30th January 2012, 10:47 PM
The extra height comes from the shackles and extended spring hangers.
The front springs are (should be) standard 109" 11-leaf fronts.
The rear springs should be "heavy duty" 8-leaf springs (7.1 mm thick leaves).
You will get a lot of extra wheel travel if you remove 2-leaves from each pack. Search for my threads on modifying springs.
army2a
30th January 2012, 10:55 PM
Ok thanks heaps guys, I thought that was the case, much appreciated
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.