Log in

View Full Version : Warn Winch Motors - Will a 6hp fit?



Jock The Rock
7th February 2012, 05:50 AM
Gday

I'm currently rebuilding an XD9000 Warn winch

I'm after a new motor for it, I'm pretty sure it came standard with a 4.6hp motor

Will the larger 6hp motor bolt straight on?

Thanks

Jock The Rock
7th February 2012, 08:22 PM
Bump

rick130
7th February 2012, 09:19 PM
I think this was discussed on Outer's a few years back ?

Might pay to do a search there ?

Psimpson7
7th February 2012, 09:27 PM
Hi Jock,

It depends on the year from memory. They changed the input gear in the housing but I can't remember the exact details

if it had the 4.6hp standard I think it will as I swapped the 6hp from an xp onto my 8274-50 which had the 4.6hp motor.

cheers
Pete

Slunnie
7th February 2012, 09:39 PM
As far as I'm aware the XP9.5 or 9500 (???) is just an XD9000 with a 6hp motor.

I think the motor does just go straight on, and all of the warm motors are interchangable, but the 6hp is pretty big and you may find the winch when mounted is already up against the chassis rail with the 4.6hp, yet the 6hp being longer wont fit.

Jock The Rock
8th February 2012, 05:54 AM
Thanks for your posts, I may just stick with the standard motor

clubagreenie
8th February 2012, 06:34 AM
If the difference in the input gears is only the motor shaft being keyed (early) or splined (late) then they should interchange (they will on the 8274 and the motors aree the same) and so the motors should interchange also but the length is in question.

PSI250
8th February 2012, 12:12 PM
You can buy the input gear which will allow an older winch to take the newer motor. Check eBay.

4x4shooter
8th February 2012, 08:19 PM
I can call warn while I'm at work tomoz and find out if u like?

fesm_ndt
9th February 2012, 09:36 PM
I got the manual if you want it


SERVICE MANUAL
FOR THE
Warn
Mid-Frame Winches
M-6000, M-8000, XD9000
12V DC
Electric Winch

5.33 Mb as Warn US sent it to me a few months ago (very helpful buggers at Warn)

I wish the 8274 manual had the same detail.... but at least covered on the internet

Jock The Rock
10th February 2012, 05:44 AM
I got the manual if you want it


SERVICE MANUAL
FOR THE
Warn
Mid-Frame Winches
M-6000, M-8000, XD9000
12V DC
Electric Winch

5.33 Mb as Warn US sent it to me a few months ago (very helpful buggers at Warn)

I wish the 8274 manual had the same detail.... but at least covered on the internet

That would be handy thanks

Yeh the customer service at Warn US is brilliant

I'll PM you my email address