PDA

View Full Version : Cost for sequential gas injection


land864
4th March 2012, 09:38 PM
Any ideas on cost to get Sequential gas injection fitted to a D2 V8
Cannon
5th March 2012, 07:33 AM
It depends a lot on the tanks & location you choose as well as the under bonnet kit.

Here's what I did:

Bought a Marrelli under bonnet kit from the UK Approx $1100 delivered.

Had my installer source a second hand manifold tank & install the lot for $2700.
After the $1500 rebate (which is now $1000 I think) it cost me $2300.

Best money spent so far:)

https://www.aulro.com/afvb/images/imported/2012/03/1212.jpg


https://www.aulro.com/afvb/images/imported/2012/03/1213.jpg

https://www.aulro.com/afvb/images/imported/2012/03/1214.jpg
ozscott
26th September 2012, 07:41 PM
Mate - same set up as mine from the firewall back...I am looking at LP injection to replace my mixer set up. Where did you source yours?

Cheers
bee utey
26th September 2012, 09:43 PM
Mate - same set up as mine from the firewall back...I am looking at LP injection to replace my mixer set up. Where did you source yours? Cheers They were on ebay, can't see them at the moment.
Cannon
27th September 2012, 05:33 AM
sales@hytekautogas.co.uk Steve is his name.

Beeutey's right they were on ebay.

Search this forum for Marrelli to see quite a few threads.

I'm running out the door ATM so no time to elaborate sorry
Cannon
27th September 2012, 05:34 AM
his ebay shop (http://www.ebay.com.au/sch/sstrongitharm/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686)
ytt105
27th September 2012, 05:24 PM
Try this mob.

I've put this on my 4.6 Thor engined P38.

The installer was very impressed with the quality and has started using it himself now.
ytt105
27th September 2012, 05:27 PM
Fingergraphical error, I forgot to add the link.

It's here (http://www.ebay.com.au/itm/NGV-Sequential-LPG-Conversion-Kit-8-Cylinder-Kit-/190729154983?pt=AU_Car_Parts_Accessories&hash=item2c6857f1a7#ht_1457wt_1186)
redmond
1st April 2013, 07:33 PM
:eek::eek::eek::eek::eek:
They were on ebay, can't see them at the moment. bee utey how do you set base idle on a 3.9 v8 petrol also where do you get chamopion spark plugs rn11yc from
bee utey
1st April 2013, 08:37 PM
:eek::eek::eek::eek::eek: bee utey how do you set base idle on a 3.9 v8 petrol also where do you get chamopion spark plugs rn11yc from
1/. base idle, put a 3/16 allen key in the recessed hole on top of the throttle body area and turn out/in until idle stabilises to your satisfaction.
2. I don't use Champion, ever. I use Bosch WR7DC+ plugs for gas, avaliable from any Bursons, Supercrap or Repco.
Cannon
3rd April 2013, 01:26 PM
2. I don't use Champion, ever. I use Bosch WR7DC+ plugs for gas, avaliable from any Bursons, Supercrap or Repco.

Are these plugs good for a Thor engine with sequential as well?

Gap set to 6mm?
bee utey
3rd April 2013, 01:44 PM
Are these plugs good for a Thor engine with sequential as well?

Gap set to 6mm?

If you've got sequential you can run 0.6-0.7mm with these plugs, no problems, depending on how long you leave them in (electrode wear increases firing voltages). However you will be better off with long life platinum LPG plugs, Bosch part number WR7KI33S. They come out of the box at 0.7mm and work very well. You will have to order them, even Bursons do not stock them anymore. They order them from Bosch in Melbourne as I need them.