how do you removal the actual fog light from a bullbar??

[pohm66]

Okay I have had a squizz in and around the fog light but for the life of me can't suss out out to remove the fog light from behind the ARB bullbar. Need to remove the LHS one.

Any clues????

I know from the front there are 3 locating screws but these are not accessible through the bullbar.

Cheers....

[CaverD3]

You need to remove the cover plates under the bull bar to get at the lights. LR one is tight to get at but possible. I removed mine to get rid of the fog in it as it wa obvious after the other was replaced.

[pohm66]

Thanks caverd3. Did you still have remove via the 3 front screws or was it possible to get out from the back?

[pohm66]

Hey CaverD3 just seen your write up at

DISCO3.CO.UK - View topic - clean fog lights (http://www.disco3.co.uk/forum/topic70542.html?highlight=%2Bfog+%2Bbullbar)

I thinks answers my above question.

Cheers...

[bobzed57]

I need to do this as well. I've been to the DISCO3 site and seen Caver's post. Is it only the two bolts at the very top of the fog light bracket that need undoing to get it out?

I also can't tell if the bracket is attached to the indicators.

The LHS one seems it's going to be a pita because of the washer fluid bottle.

Any tips to make this easy welcome.

Thanks

Bob

[bobzed57]

Done. Fiddly and much cussing but all cleaned and back together now.