tips on multiple accessories wiring please

[Ozzy119]

Hi,

So once I get the bar on I'll be aiming to wire in the UHF. But I'm slightly curious about the options for cables now as I already have Traxide battery isolator kit for 12v power to rear tow hitch running through the lower driver's foot well fire wall hole (what a f8ck that was to get in place) and I have the EBC power feeds running through the upper drivers side fire wall hole. (I think another one of Sniegy's wizzard instructions)

What's left for the UHF aerial and +/- cables?? and if I'm planning ahead, spot lights? (hoping for some more Sniegy magic here!)

cheers,

[PaulGOz]

Some options, as you already have +/- via Traxside in the rear couldn't you power the UHF off that cable that has already been run? I have done something simialr with a DIY install and a second battery in the rear footwell.

For Antenna I have a Mobile Phone Antenna on the roof rack that is cabled through one of the rubber grommets above the rear door.

[sniegy]

Hey mate
Would love to give you some good news but....don't even try on the passenger side, the CJB sits against the firewall & has hundreds of cables running from/to it. One forceful move could cause heaps of problems long term.

For the power supply I picked mine up from the power sockets in the centre console, no need to run cable outside :)
The aerial will fit in the original hole near the brake booster as there is a fair amount of room.

HTH

Cheers

[Ashes]

Another option you might want to consider is putting a fuse box under the drivers seat and branching all your 12v electrics off that.