View Full Version : Dash Brake Lights
bear666
29th May 2012, 05:59 PM
Need Some Ideas. Hand brake light,Traction Control and ABS light flash on when i apply the brake's. They only stay on for a second. Brakes all work fine. Anyone have any ideas?
pat911
29th May 2012, 06:22 PM
Replacing the ABS accumulator fixed this exact fault on my 1995 4.0L
Easy DIY job. Just remember to depressurise the system first.
Cheers
Pat.
p38arover
29th May 2012, 06:34 PM
Agreed.
Keithy P38
29th May 2012, 07:19 PM
Depressurising = pumping brake pedal 30ish times with the ignition off, correct me if I'm wrong?
wayneg
30th May 2012, 07:03 PM
Pretty much right. After the 30 pumps Rave says wait 60 seconds and give it another 4 pumps
Fitzy2011
31st May 2012, 05:18 PM
I have a spare accumulator you can try if that would help you, 0400 429283
Ken
bear666
4th June 2012, 04:36 PM
Thanks for that, will try this weekend. Peter
Hoges
4th June 2012, 08:06 PM
also make sure the connectors into the ECU (located up the firewall behind the glove box) are properly located...had this problem and was planning to get a new ECU... found loose connection by chance...;)
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.