PDA

View Full Version : Wiring through bulkhead???


FL2go
5th September 2012, 12:21 PM
Has anyone got any ideas about how/where to route 12V cable through the bulkhead of a 2007 FL2 diesel?

I've just about finished installing my Ham rig, pulled apart the dash and centre console without any major dramas, but getting the cable through to the battery has me stumped.

Any ideas would be very welcome.
PhilipA
5th September 2012, 12:46 PM
Are there LH drive blanks in a Freelander?
If so that is usually a good spot.
Regards Philip A
FL2go
5th September 2012, 02:06 PM
No blanks that I can see.
Petesfree2
6th September 2012, 03:43 AM
Maybe you can pick up a 12v supply from under the dash; fuse?
FL2go
6th September 2012, 07:35 AM
Problem is, I need a 25Amp supply. It has to come straight from the battery.
FL2go
6th September 2012, 04:21 PM
Problem solved, Guys. Thanks to an old post on another forum, I followed their advice and traced the bonnet release lever through the bulk head and was able to feed coat hanger wire through. Only problem is, you have to remove the battery and battery tray to retrieve the cable. What a mission!

Thanks for the advice from those who responded.

Cheers