View Full Version : Identify these 2 parts of my '94 110 300Tdi
GyroLandy
13th September 2012, 08:36 AM
Anyone konw where these go?
I have stripped out the whole interior, dash and aircon so they must be from inside somewhere... I think?
dfendr
13th September 2012, 08:41 AM
First one is A door check strap cover
Second one behind the wiper motor????
nedflanders
13th September 2012, 09:12 AM
Yep second one is definitely behind wiper motor, changed a few motors ;)
GyroLandy
13th September 2012, 09:15 AM
Damn! I was hoping it didn't go behind the dash seeing as I had already put that back. I noticed the wiper motor had quite a bit of movement and could not be keept tight against the firewall with the bracket. Is this just a insert between the motor and the bracket? I built up he bracket with butyl tape and it holds the wiper motor prety tight now. Do I need to change to this part?
I take it the check strap cover is for the rear door?
Thanks for the help
GyroLandy
14th September 2012, 07:20 AM
One more question, I'm replacing the flexible hoses (one at each front wheel and one on the rear before it branches off to the rear wheels) with braided hoses.
When I fit the new ones do I need to use some sort od sealant or thread tape to ensure a airtight connection?
LowRanger
14th September 2012, 07:36 AM
Definately NOT:eek:
Just fit them and do them up,and bleed the brakes.
Overlander
18th September 2012, 09:18 AM
The checkstrap cover is for the front doors. Goes over the metal retainer that stops the door from opening too far.
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.