Log in

View Full Version : HEY JC



red roo
6th December 2012, 05:34 PM
Is castrol egde prof 5/30 alright for 2010 ford motor def eng. thanks for any advice

justinc
6th December 2012, 06:16 PM
Yes fine. The Shell Helix 5W40 is the factory favourite IIRC , but any full synthetic C* rated (diesel turbo engine) high quality 5W30/40 oil will be fine. You can use Penrite HPR5, also.

AFAIK even the new Def with the 2.2 has no DPF, so a low SAPS oil isn't even required.

Just looking at their site, Longlife III should be fine :)

JC

PAT303
6th December 2012, 07:33 PM
JC,Shell is the oil dealers use?,when my Tdi was new it was Mobil and I changed to Penrite once the warranty ran out,I'd like to do the same with the TDCi,Penrite is my personal favourite oil. Pat

red roo
6th December 2012, 07:37 PM
THANKS FOR THAT JC

carlschmid2002
6th December 2012, 07:48 PM
DPF? SAPS? Could anyone enlighten me please.

justinc
6th December 2012, 07:49 PM
JC,Shell is the oil dealers use?,when my Tdi was new it was Mobil and I changed to Penrite once the warranty ran out,I'd like to do the same with the TDCi,Penrite is my personal favourite oil. Pat

Hi pat,

AFAIK this is/ was correct, a Shell helix ultra 5w40 from memory. Personally, ANY 5w40 that I mentioned above would be suitable IMO.
I use Penrite too, a very good oil.

JC

justinc
6th December 2012, 07:50 PM
DPF? SAPS? Could anyone enlighten me please.

http://www.harboursideautomarine.com.au/Low%20Saps%20Tech%20Talk.pdf


:)


JC

carlschmid2002
6th December 2012, 09:02 PM
http://www.harboursideautomarine.com.au/Low%20Saps%20Tech%20Talk.pdf

:)

JC

Thankyou very much. Cheers