Turbo wastegate actuator pin

[airfireman1]

Has any body had the wastegate actuator pin (wastegate not the actuator) snap off. Mine did yesterday. I have replaced it with a small bolt and several nuts as a temporary measure. Is there a replacement setup as it seems to be part of the wastegate itself.?? Its a very bad feeling driving with no boost
Cheers Dave

[Pinelli]

Hi Dave, have you had any progress with this?

[airfireman1]

Yes, managed to drill out the old pin and put a small bolt thru the wastegate lever and use a couple of nylock nuts with washers to keep it located and alow it to swivel with the actuator. Seems to be working quite well.
Boost is back to normal.