View Full Version : Lower tailgate straps
Fitzy2011
20th January 2013, 04:20 PM
Is it possible to use or modify the scissor hinge off a classic to replace the cables on the p38 lower tailgate. After I had one rust out, I don't trust them any more. I hope this hasn,t been covered before because I did search and couldn,t find anything!
benji
20th January 2013, 05:52 PM
You can buy them relatively cheaply. Wonder if there is some stainless ones around.
I doubt one could be modified. As in the closed position the relative height of the tailgate and pillar pins would have to be exactly the same.
Scouse
21st January 2013, 08:13 AM
If they're the originals, then they were made of a poor quality material.
A bulletin was issued for the problem, NRR/76/33/95/EN.
Part # ALR5237 is supposed to be a better cable.
Fitzy2011
21st January 2013, 08:39 AM
Ok thanks, I,ll see if I can get some, but it always amazes me that they would change from the tried and tested classic ones to a poor quality crappy one.
Scouse
21st January 2013, 09:32 AM
I agree the Classic type were a lot stronger but probably overkill really.
The Classic stays also had a habit of swinging when the tailgate was closed creating the odd knock on braking/accelerating.
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.