Winch - how to spin the gearbox around?

[twr7cx]

I've got an Ironman 9500lb winch. I want to spin the gearbox around 90deg so that the engage/disengage leaver is on the top allowing me to just reach through the hole in the top of the ARB Sahara bullbar.

I took the small bolts off the top cover, I originally thought they would be long all the way through the body and then I could just spin it, but not so. Do I keep pulling all the gears out now?

Winch:

https://www.aulro.com/afvb/images/imported/2013/03/333.jpg
https://www.aulro.com/afvb/images/imported/2013/03/334.jpg
https://www.aulro.com/afvb/images/imported/2013/03/335.jpg
https://www.aulro.com/afvb/images/imported/2013/03/336.jpg
https://www.aulro.com/afvb/images/imported/2013/03/337.jpg

ARB Sahara bullbar:

https://www.aulro.com/afvb/images/imported/2013/03/338.jpg
https://www.aulro.com/afvb/images/imported/2013/03/339.jpg

[twr7cx]

Please ignore, I just found the destructions! Seems I was tackling it from the wrong end!

http://www.media.ironman4x4.pl/files/pdf/winch_clutch_handle%20rotation_im.pdf

[Yorkie]

I was going to say start at the other end. ;)

[Landover]

Yep, beat me to it. I did mine without issue but did follow the instuctions. While it's out it would be a good time to give all the gears a good grease.