PDA

View Full Version : Need A Faultmate in ADELAIDE PLEASE!!!



taffy241255
30th March 2013, 02:41 PM
Hi all,
Anyone in Adelaide who can help? Have a SRS and message centre AIRBAG fault , bulbs ok , did it when I removed dash for a new A/C matrix
96 HSE so no side airbags etc , any help would be great and SAVE money.:wasntme:PS did reconnect battery before finishing replacement of airbag.

BusinessConnected
30th March 2013, 10:27 PM
Drive to Melbourne and you can use mine :)

taffy241255
1st April 2013, 08:27 PM
Drive to Melbourne and you can use mine :)
Thanks , but do not have the time or money at the moment!

PaulP38a
1st April 2013, 09:52 PM
Ask in the Diagnostics forum for someone who has a Nanocom Evo with P38 unlock codes. The codes are different for GEMS (pre-99) and Motronic (99+) models, so check this too.

Nanocoms are multi-vehicle by default, whereas FaultMates are single-vehicle by default.

Best wishes, Paul.

BigJon
2nd April 2013, 08:10 AM
I have a multi vehicle scan tool which might work with a P38. I have never plugged it into one as none of my customers drive P38s.

taffy241255
2nd April 2013, 10:43 AM
Ask in the Diagnostics forum for someone who has a Nanocom Evo with P38 unlock codes. The codes are different for GEMS (pre-99) and Motronic (99+) models, so check this too.

Nanocoms are multi-vehicle by default, whereas FaultMates are single-vehicle by default.

Best wishes, Paul.
Thanks Paul I will check it out!

jsp
2nd April 2013, 11:48 AM
I have a tool but unsure if it will unlock SRS, where bouts in adelaide are you?

jsp
2nd April 2013, 10:12 PM
Can anyone else help out in Adelaide?


I see you posted in the dagnostics forum so hope someone helps out!