Discovery 2 wheel stud thread type?

[twr7cx]

Anyone able to confirm the thread of the wheel studs on a D2? Looks like M14 x 1.5?

[Tombie]

Yep...

[Tombie]

http://bit.ly/17geEnB

[PhilipA]

That's a good link.
Should be in every post!LOL
Regards Philip A

[twr7cx]

Let me google that for you (http://bit.ly/17geEnB)

I read through numerous threads hence why I suspected that they were M14 x 1.5. However, some of the UK sites had threads debating on whether they were M16 or M14, which is why I made this thread to check.

I can confirm that my new M14 x 1.5 wheel nuts thread perfectly.

[Alex 110]

However, some of the UK sites had threads debating on whether they were M16 or M14.
M16 is the D1/Defender/RRC wheel stud

[kgmcc]

Disco IIs, inc. my 2003 Disco IIa, have 16 mm studs.

Disco 3 & RRS have 14 mm studs &

Classic RR & Disco 1 have 14 mm studs.

This is in line with the following info on 4x4 wheel nuts Land Rover, Range Rover Sport by PRI Racing authorised distributor (http://www.priracing.com/section.php/331/1/4x4-nuts)

Wheel nuts for Range Rover, Range Rover Sport, Discovery, Defender. Take careful note of the listing below along with the thread size and seat type.

DRR - Range Rover 1993-2002, Discovery 1993-2004 Note this is M16x1.5 version - Shank diameter 28.5mm, HEX 27mm

DRR2 - Range Rover up to 1992, Discovery 1993-1998 Note this is M14x1.5 version, Defender 90-110 - Shank diameter 28.5mm, HEX 27mm

DRR1 - Range Rover 2002-2005 - M14x1.5 - Shank diameter 20mm, HEX 22mm

DRR3 - Range Rover (inc. Sport) 2006>, Discovery 3 - M14x1.5 - Shank diameter 22.5mm, HEX 22mm

[MR LR]

Disco IIs, inc. my 2003 Disco IIa, have 16 mm studs.

Disco 3 & RRS have 14 mm studs &

Classic RR & Disco 1 have 14 mm studs.

This is in line with the following info on 4x4 wheel nuts Land Rover, Range Rover Sport by PRI Racing authorised distributor (http://www.priracing.com/section.php/331/1/4x4-nuts)

Wheel nuts for Range Rover, Range Rover Sport, Discovery, Defender. Take careful note of the listing below along with the thread size and seat type.

DRR - Range Rover 1993-2002, Discovery 1993-2004 Note this is M16x1.5 version - Shank diameter 28.5mm, HEX 27mm

DRR2 - Range Rover up to 1992, Discovery 1993-1998 Note this is M14x1.5 version, Defender 90-110 - Shank diameter 28.5mm, HEX 27mm

DRR1 - Range Rover 2002-2005 - M14x1.5 - Shank diameter 20mm, HEX 22mm

DRR3 - Range Rover (inc. Sport) 2006>, Discovery 3 - M14x1.5 - Shank diameter 22.5mm, HEX 22mm
NO THEY DON'T

Thats is all rubbish

Seeing's I'm on AULRO not pirate i won't go all noob bashing on you.

Anything LR with a 5x120 PCD has 14x1.5mm wheel studs (dunno about freelanders, not even sure what PCD they have).

Cheers
Will

[Tombie]

As per Jnr...

D1 and RRC 5 on 165mm 16mm

D2, P38, D3, D4 & RRS are 5 on 120 pcd and 14mm studs