Fixing fuel tanks

[gouldy1]

I have been reading about fixing petrol tanks and thought someone might have experienced this before.
Red Kote seems to work but i read that using a mixture of Plumbers glue and cleaner also works a treat.( last 20 years so the chap explains )
This interests me because i use it at work regulary and i know it does form a skin inside the bottles and i suppose this is what you are looking for inside the fuel tank.
So if anyone has used this method it would be good to get some feedback.
Thanking you perry.

[gromit]

If you use the search function you will find what you need.

here's some info I posted when I did my tank.

http://www.aulro.com/afvb/series-i-land-rover-enthusiasts-section/159944-1956-series-1-pto-welder-home-made-4.html

Post #36


Colin

[chazza]

I have used Back In's glue method - works really well. Clean the tank with caustic soda first,

Cheers Charlie

[back_in]

Hi All
pleased to see my ideas do work
Just one thing
water it down with a little more primer
helps in spreading the mix over all the surface
keep moving the mix around coating top and bottom
until it skins
cheers
Ian