2.6 F-head problems

[SMASH]

Alright so i have just put a vrs kit through my 2.6 f head and it still miss fires on 3 cylinders, it had a blown head gasket, all the valves were good and i have reset all the valve clearances. has all good compression and its has a stromberg carby on it and im pretty sure its overfueling like crazy, i am thinking of making an adapter plate for a down draft carby. and ideas why its missing? not firing at all on 3 cylinders!

[Ozdunc]

Leads, dizzy top, rotor, plugs - would be the first things I'd be checking

[SMASH]

cheers!! yeah feeling it might be plugs i just replaced the rotor button and i am gunna try a dizzy cap i have with the leads built into it sarvo, see if that works might find some plugs and try them too!

[chazza]

ci just replaced the rotor button and i am gunna try a dizzy cap i have with the leads built into it sarvo, see if that works might find some plugs and try them too!

What make of rotor arm is it? There are heaps of new crappo rotor arms available now, which don't work! Try using your old one if you suspect this is the problem, or buy one from the Distributor Doctor in the UK.

Use NGK plugs and good quality leads,

Cheers Charlie

[tangus89]

Hey

My 2.6 needs plugs and leads replaced every 15-20000 km otherwise it gets a terrible miss. I only use NGK plugs, topgun leads and bosch dissy gear.
usually carry a spare rotor as well.

cheers

[djam1]

I have got a brand new carb for a 2.6 if you need one

[SMASH]

thanks guys it was plugs and i reset all the exhaust valve clearances need to buy some new plugs i have some 2nd hand ones in it
Cheers!!

[SMASH]

I have got a brand new carb for a 2.6 if you need one
How much would you want for it? and is it a stromberg?

[SMASH]

Anyone know the NGK code for the plugs?

[tangus89]

B5ES from memory