More help on part ID

[SII Josh]

howdy all,

yesterday i decided to fill the main gear box and the transfer box with oil as i waited for the prop shafts to dry. Tonight as i fitted the front prop shaft i got a drop of oil on my glasses, this resulted in a colourful word :)

i have attached a photo of the suspect oil leak spot, my questions are:

1: is the flange the prop is connected to the out put shaft flange/
2: what seal do you think i need to replace?


cheers for your time and knowledge
Josh

[B.S.F.]

Yes, it's the output shaft flange. Any bearing shop should be able to supply you with a seal .The number is P 3014. The old Land rover part no. is 236417. The measurements are 1.625 x 2.500 x 0.375. .W.

[SII Josh]

Awesome, thanks for that B.S.F Nut off to the shops tomorrow for me :)

[SII Josh]

also looking at the under side of the gearbox, looks like it needs a clean :D

will add it to my list :)