Two quick questions - fan hub and EFI V8

[2 rocks]

Hi all
To quick questions on the County…

1. My new fan hub arrived yesterday, can this job be done safely/easily without a hub spanner? From what I can see the fan shroud should lift out of the way and give reasonable access…

2. I have the chance to buy an EFI V8 (still only a 3.5) from an '89 RRC. What will I need to consider or will this be a straight slot in? I'm thinking the air box may be an issue, but I don't really know what the RRC's have…

Cheers
Mike

[Landy86]

There's a bit involved
I have a efi 3.9l in a 110

Different fuel pump
Regulator
Lots of wiring
Ect

And I'm pretty sure I have hub spanner in car
I live just near quinns if ya wanted to borrow it some time?

[2 rocks]

There's a bit involved
I have a efi 3.9l in a 110

Different fuel pump
Regulator
Lots of wiring
Ect

And I'm pretty sure I have hub spanner in car
I live just near quinns if ya wanted to borrow it some time?

Thanks mate! I'll shoot you a PM a bit later…

Damn - I'd hoped it might be all pretty self contained, ECU etc. I know from previous (3.9 & 4.0) Disco's they have the in-tank pump, I was sort of hoping an '89 RR might have been external.
I wondered what it was behind the shield under the County when I got it - I was running on LPG so the pump wasn't making any noise :p
Cheers
Mike