View Full Version : trailer plug
crawal
13th April 2014, 07:00 AM
We have just got big red (2008 D3 ) and the previous owner has fitted autilux plug - and have removed both factory fit plugs,so i bought an adapator as a short term fix.
Big red has been fitted with a dual tire Kaymar bar and long rage tank so access is a bit limited .
I have no electric brake or tail light at the plug , i have checked the rear fuse any other ideas ?
PS cant get the permagrin off..:D
Basil135
14th April 2014, 05:56 PM
It should be a simple case of swapping out the old, for the new.
Any chance you could put up a photo of the offending plug (socket?)
crawal
14th April 2014, 07:15 PM
this is the offending unit , after long looks I have booked it into the auto elec for him to check over along with the dual battery set up
https://www.google.com.au/search?q=utilux+trailer+plug&source=lnms&tbm=isch&sa=X&ei=UbRLU9ynIJG7lQWA_oCIBA&ved=0CAgQ_AUoAQ&biw=1440&bih=809#facrc=_&imgdii=_&imgrc=dR26wn9k9ItFMM%253A%3BfIoqAWU0bc5fcM%3Bhttp% 253A%252F%252Fwww.elecspess.com.au%252Fspnet6%252F img%252FH%252F4%252F0%252F9%252F7%252FH40975.jpg%3 Bhttp%253A%252F%252Fwww.elecspess.com.au%252Fprodu cts%252Fproduct%252FH40975%253Fcategory%253DDDUQCO JA%2526%3B500%3B500
sorry will try to do photos in the next days
Basil135
14th April 2014, 08:37 PM
Ahhh ok.
So, it appears he has swapped out the large round, for a small round.
In theory, it should be a simple swap over. An alternative is an adaptor.
Your auto sparky will be able to sort that out for you. ;)
sniegy
14th April 2014, 09:19 PM
Cawal,
An easy fix to get back your original plugs, would be to ring Triumph Rovers Spares & get them to send you a plug or plugs depending on what you need. The plug screws into the chassis at the rear & plugs into the supply under the L/H rear tail light assembly.
Than can be your starting point to get back to normality.
Does the vehicle have trailer brakes fitted?
I personally would start from scratch. (p.s there is a write up of how to fit trailer brakes in this forum for a D3 specific-dont use the D4 one)
Any questions feel free to ask.
Cheers
crawal
15th April 2014, 06:00 PM
Thanks Sniegy, big red is having a sleep over at the auto elec's to get fixed
just going to replaced the smaller plug for a normal 7 pin as the other side has the Anderson plug fitted .Get all the plugs checked over to make sure of no surprise some where down the road.
Alas not a traxide kit ,doesn't look that neat so main reason to get it checked out now .
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.