BeCM swap on P38

[davidsonsm]

Just wondering if anybody had successfully swapped out their original BeCM for a spare? Is there a step by step guide anywhere? What are the pitfalls and risks?

I've put a 2nd hand power board in mine, but problems with the lights persist. I tried soldering new mosfets in my original power board, but it was way too fiddly for my skills.

I was considering swapping out the whole thing for another spare. But wondered what programming could be done with a nanocom (which I don't have) or similar.

I don't want to swap the locksets, ecu and keys.

[olbod]

Good one.
I have been asking myself the same question but my ? in reference to a new one.

Carn Guys.

[p38arover]

One pitfall is that the odometer reading is stored in the instrument binnacle and the BECM.

Changing either will see the recorded km change to be the same in both - but at the highest of the two.

Rupert Prior can probably do it for you. I think there are a few variables in the old BECM that must be copied across to the new, e.g., VIN.

[FANTOM P38]

Sean I had Rupert do mine when i taught the original one to swim!
need to send botyh to him with key & remote reciever from memory.
Give him call first & he will confirm that for you.

[olbod]

Sean I had Rupert do mine when i taught the original one to swim!
need to send botyh to him with key & remote reciever from memory.
Give him call first & he will confirm that for you.


On our Bitch the immobiliser and alarm have been turned off and the keys have no batteries.
What then do you suppose ?

Couldn't just be as easy as changing a light bulb, eh.
Damned electric stuff.

[Scouse]

On our Bitch the immobiliser and alarm have been turned off and the keys have no batteries.
What then do you suppose ?

Couldn't just be as easy as changing a light bulb, eh.
Damned electric stuff.It still needs to synchronise with the engine ECU.

[davidsonsm]

Does anybody have rupert prior's contact details independent of this forum?

[Scouse]

0421 509 083

[davidsonsm]

Excuse my ignorance but who is rupert prior and what are his BeCM credentials? No offence intended.

[Rupert Prior]

p38 repairs are what i do for a living. my number is 0421 509083.
regards Rupert

[Scouse]

There's also Lee Bourgeois at Labtronx who would be able to help too:
Labtronx Home (http://www.labtronx.com.au/)

[TheTree]

p38 repairs are what i do for a living. my number is 0421 509083.
regards Rupert

Hi

No doubt you are a man of infinite patience then :p

Steve

[Rupert Prior]

they are the last, i have none left for LM, D3, D4, Sport or ****landers.