View Full Version : Tail Lights
davidjl
10th June 2014, 10:41 AM
I am trying to change the lenses on my defenders taillights but the existing lenses will not release from the mounts. Does anyone know how I can loosen them.
Scouse
10th June 2014, 12:21 PM
Later Defender lights have the lenses bonded to the base & have a removable globe socket for access. Sounds like you have these.
Trundle
10th June 2014, 05:01 PM
If you are a tight arse like me, and only bought a lens kit, you can break the existing lens and clean out any little bits with a pick. then you can reseat and seal the new lenses in.
Reads90
10th June 2014, 05:34 PM
As said from the 300tdi onwards they are all one unit and do not come part like on the earlier ones 
I how ever do have a full set of the clear ones for the later Land Rovers  which I don't have a use for anymore as I changed mine to LED ones.
Mammalalien
10th June 2014, 06:50 PM
I also have a bunch of earlier-type lenses left over from LED replacement. All colours, some in good nick.
Give me a shout if you want any.
davidjl
11th June 2014, 02:05 PM
Thanks everyone for that. I assumed that they were the same as Series lights, but obviously not. It seems that even in 1996 Land Rover were trying to push there trucks into the 21st century!
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.