perentie door part numbers

[weeds]

I haven't had any luck in sourcing perentie doors.........

chasing the part numbers I need to make my own doors.......

cheers

[Barefoot Dave]

G'Day Weeds.
Are you downgrading the doors on your 110 or did you get a Perentie?
What PNs do you need?

[weeds]

G'Day Weeds.
Are you downgrading the doors on your 110 or did you get a Perentie?
What PNs do you need?

upgrading the doors on my 110 to perentie

need al the parts

door bottom
door handle/latch assembly
door top

got hinges
door seal
hoping my lock barrels will fit

[isuzurover]

I would buy series 3 door bottoms (which are virtually identical). If you don't want to use the SIII lock assembly you will need to modify that part.

Then it is simply a matter of finding some perentie door tops SH - or get an alminium fabricator to make some.

And before anyone says it won't work or they don't fit:
https://www.aulro.com/afvb/images/imported/2014/08/130.jpg

https://www.aulro.com/afvb/images/imported/2014/08/131.jpg

[weeds]

I would buy series 3 door bottoms (which are virtually identical). If you don't want to use the SIII lock assembly you will need to modify that part.

Then it is simply a matter of finding some perentie door tops SH - or get an alminium fabricator to make some.

And before anyone says it won't work or they don't fit:




umm...

one reliable source say the prenetie doors are infact SIII and bolt straight up

another source attempted to fit a SIII door to a perentie and the door strike didn't line up

so I figure if somebody would be kind enough to post the part numbers I can be sure

[Bearman]

I will post them up tonight if someone doesn't before then. Out at the moment.

[isuzurover]

umm...

one reliable source say the prenetie doors are infact SIII and bolt straight up

another source attempted to fit a SIII door to a perentie and the door strike didn't line up

so I figure if somebody would be kind enough to post the part numbers I can be sure

If you are happy to use SIII locks and strikers then it will all work fine. I don't know what the perentie use, but the one-ten/county locks are very different to SIII - I have never checked if they are interchangeable.

[The ho har's]

The debate continues :D

Where is Blknight, he would know part no's wouldn't he?

Mrs hh:angel:

[LandroverScott]

If you are happy to use SIII locks and strikers then it will all work fine. I don't know what the perentie use, but the one-ten/county locks are very different to SIII - I have never checked if they are interchangeable.

Yes series 3 locks are the same as Perentie door latches/locks

I've put new ones on mine

[Barefoot Dave]

Weeds, this should get you started. There are numerous small plates, bolts and seals in addition to what is below. Did you chase up those blokes that are parting out perenties?

door bottom: Exterior Panel: (LH) RTC6288 (RH) RTC6287
Interior Pocket molded FRP, olive green: HYG 3501
Door capping: (LH) RRC 5035, (RH) RRC 5034
door handle/latch assembly;
Striker: (LH) ALR4651 (RH) ALR 4652
(Shroud): (LH) MRC 9007 (RH) MRC 9006
Door handle: YGA 451L

door top (Window, Veh Sidescreen assembly complete)
(LR) MWC 4747
(RH) MWC 4746

[Bearman]

Looks like Dave has sorted it all out Weeds. Give me a yell if you need any other numbers.

[weeds]

Did you chase up those blokes that are parting out perenties?



PM me any leads you have, the couple that I have come across don't want to sell the doors......british off road have listed a few on the website as wrecking, I rang them only to be told it incorrect and that they are looking at making as many complete as they can than wrecking what's left......the price they want if doors are left over is a bit much for me, would be cheaper for me to buy a wrecked perentie I think

thanks for posting the part number, I will see what I can come up with