Rear tow cover template

[Ooops]

Does any one have a template for trimming the rear tow cover so that in can be fitted with Mitch hitch in place?

I'd like to tidy things up back there

TIA

[Tombie]

I just started cutting :)
It's not too difficult.. Just cut it completely in halves then hold it up alongside and mark out what needs removing.

[ytt105]

I just started cutting :)
It's not too difficult.. Just cut it completely in halves then hold it up alongside and mark out what needs removing.

Thats the way I did mine!

[LRD414]

Same here. Cut in half and then work the shape required. I finished off with a rasp.
You can see the centre cut in this photo. It's only a small finger that you want to keep going across above the hitch. It's tight at about 10mm wide.

https://www.aulro.com/afvb/images/imported/2015/06/512.jpg

Cheers,
Scott

[The Fridster]

I finished off the cut out with pinch weld from Clarke Rubber. Just tidies up the unavoidable rough edges. :

[Ooops]

Thanks for the pointers guys. It had completely escaped me that your covers weren't one piece any more. :blush:


Now it looks doable:BigThumb: