Puma seat box loom grommet - where to buy?

[bent]

Hi folks.

I have just installed a Mulgo exbox in my 110 puma, with the next step to install an accessories fuse system. I would like to use an original style grommet for the accessory wiring to penetrate into the ex box. Does anybody know where I could get one or an original part number?

Sames as these ones (but for a puma).

Cheers.

[Toxic_Avenger]

Not sure about the original part number, or even if they are available as a spare part... but I've gone down this path and have had limited success finding a supplier of large diameter grommets with the cable relief tail (well in the small quantities I need at least).

I acquired these but still not biog enough to fit a bulky wiring loom thru.
https://www.aulro.com/afvb/images/imported/2015/05/13.jpg


If you are relocating your factory fuse blocks into the ex box, then you can use the existing grommets. I used a squirt of silicone spray to help get it seated, as it's a tight fit. Your ex box kit should have come with an alloy sheet for blanking the holes in the D/S seat box.

[bent]

Thanks - The grommet is for accessory wiring for fridge, lights etc to the fuse box in the exbox, as i have the DC to DC charger in the exbox as well I have to bring in the power feeds for it as well. I'll keep hunting around, I'll report back if if I find anything of interest.

Cheers