LRHybrid100
6th June 2005, 07:11 PM
G'day Guys,
I did not want to use the ABS system from the donor Disco so I removed the ABS sensors and had a plate made a plate to cover the sensor hole and also allow the install of a breather.
The breather is then taped into the cover plate and breather lines extended into the engine bay.
http://www.aulro.com/albums/TDI/DSCF0009.sized.jpg
Here you can see the different speedo drivers - left one is the RR cable speedo driver and the right one is the Disco electronic speedo driver. As both in this case had 23 splines they were interchangeable and the cable speedo reconnected to the Disco transfer gearbox.
http://www.aulro.com/albums/TDI/DSCF0011_001.sized.jpg
I did not want to use the ABS system from the donor Disco so I removed the ABS sensors and had a plate made a plate to cover the sensor hole and also allow the install of a breather.
The breather is then taped into the cover plate and breather lines extended into the engine bay.
http://www.aulro.com/albums/TDI/DSCF0009.sized.jpg
Here you can see the different speedo drivers - left one is the RR cable speedo driver and the right one is the Disco electronic speedo driver. As both in this case had 23 splines they were interchangeable and the cable speedo reconnected to the Disco transfer gearbox.
http://www.aulro.com/albums/TDI/DSCF0011_001.sized.jpg