View Full Version : driveline vibration / chatter
incisor
25th October 2015, 10:01 PM
My rangie seems to have developed a fair bit of driveline chatter
esp in the 60-80 kph range
doesn't seem noticeable above 100kph
makes the whole cab vibrate
i can't pick it ...
checked and greased the uni's, had wheels rotated and blanced, replaced panard rod bushes
does a torque converter playing up give you those sort of symptoms?
got me beat....
weeds
25th October 2015, 10:09 PM
Radius arm bushes??
Bundalene
25th October 2015, 10:36 PM
We had a similar problem with our Defender vibration between 80 - 90 especially on a downhill corner. Turned out to be panhard rod bushes, even though there was no apparent movement while watching it, while someone else turned the steering wheel.
Erich
Disco Muppet
25th October 2015, 10:56 PM
Auto gearbox mounts
350RRC
25th October 2015, 11:10 PM
Handbrake part on.
DL
Graeme
26th October 2015, 06:46 AM
How worn are the splines on the front tail-shaft's sliding joint - is there up and down movement?
incisor
26th October 2015, 11:13 AM
will check that lot out next day or so, thanks
Tank
30th October 2015, 12:52 PM
You really need to have the wheels off the ground to unload any tension on the uni-joints to test for wear, esp. the front one's, take a good pry bar/long screwdriver and torch and give the uni-joints a good workout, Regards frank.
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.