Log in

View Full Version : Where to source crossmembers?



Dauntless
27th October 2015, 08:49 PM
Hi everyone,

I have a 1970 IIA 88" and need to replace the cross member that runs approximately underneath the bellhousing. Where can I source one of these?

I also need the gearbox cross member, one outrigger and steering box cover, however I can find these on eBay UK if there isn't a better source.

All advice/info appreciated, thanks!

The ho har's
27th October 2015, 09:00 PM
Where abouts are you in NSW

Dauntless
27th October 2015, 09:18 PM
I'm near Bathurst, but happy to travel or pay for freight.

LandyAndy
27th October 2015, 09:21 PM
For the gearbox Xmember look into upgrading to the SER3 style bolted in unit,can save alot of pain later on;););););)
Andrew

Lotz-A-Landies
27th October 2015, 09:42 PM
are all SIII bolted on or just the military?

gromit
28th October 2015, 05:49 AM
Try here, they have they have the gearbox crossmember.

Land Rover Series 2, 2A and 3 Cross Members | Repair Legs | Paddock (http://www.paddockspares.com/parts-and-accessories/land-rover-series-2-and-3/chassis/chassis-parts.html)

Most Land Rover suppliers here should be able to get these parts but may have to special order. Paddocks have a setup where you pay for it, they pack it then get a freight cost, then you pay for freight. You struggle to get them to change from this but......if you then don't want to go ahead they will refund.

For the other crossmember advertise in Markets here and see if someone has a chassis they are scrapping. Some years back I got a rear crossmember that way.



Colin

JDNSW
28th October 2015, 05:56 AM
are all SIII bolted on or just the military?

The only S3 I have does not have a bolted on one - it is a late civilian one.

John

JDNSW
28th October 2015, 05:59 AM
Try Land Vehicle Spares - I know they carry one or two for coil sprung Landrovers, so they may for Series 2/2a/3. Also, try a ebay search.

John

russellrovers
28th October 2015, 03:53 PM
Hi everyone,

I have a 1970 IIA 88" and need to replace the cross member that runs approximately underneath the bellhousing. Where can I source one of these?

I also need the gearbox cross member, one outrigger and steering box cover, however I can find these on eBay UK if there isn't a better source.

All advice/info appreciated, thanks!hi i have what you require here and can post jim

The ho har's
28th October 2015, 07:34 PM
I'm near Bathurst, but happy to travel or pay for freight.

Our supplier can provide most parts and we can get them delivered to you. Which outrigger do you want? Steering box cover easy:)

Mrs hh:angel:

The ho har's
29th October 2015, 09:35 PM
I Have new prices for all your body parts. PM us if you want details

Mrs hh:angel:

Dauntless
29th October 2015, 09:42 PM
Thanks everyone. Sent some of you PMs.