PDA

View Full Version : tow bar height - can anyone help?



rfurzer
29th December 2015, 03:49 PM
Gday

can someone with a defender/county 110 and a hayman-reese type tow bar please measure the height of the square receiver tube from the ground?

What type of tow ball mounts do yo use to get the ball down ?

R

alien
29th December 2015, 04:29 PM
Gday

can someone with a defender/county 110 and a hayman-reese type tow bar please measure the height of the square receiver tube from the ground?

What type of tow ball mounts do yo use to get the ball down ?

R

I'm not at home with mine so can't measure the tube to ground hight.
I can check it if required latter.
What I can tell you is with the standard LR rated drop down tounge the tow ball mounting flat on mine is @500mm.
I needed 500mm+/-50mm as this was checked for our camper hitch hight.

Hammy110
29th December 2015, 06:17 PM
On my '12 110, Hayman Reese tow bar is approx 545mm from ground to centre of square tube (see attached snapshot).

Col 110
29th December 2015, 07:22 PM
On my '12 110, Hayman Reese tow bar is approx 545mm from ground to centre of square tube (see attached snapshot).
My '15 110 is about the same - perhaps closer to 540mm.