Aeon RubberSprings

[123rover50]

I need a set of these but cant find any.
Timbren in the US make them but I was hoping they were available here.
One used to be able to get them as I have a set on the rear of the old Forward Control.
Any ideas on supply?

Keith

[123rover50]

Well, finally found some. Just ordered a pair but they dont come with the plates.
https://www.google.com.au/url'sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwjD99HV89nUAhXDoZQKHe0ABTUQFgg1MAA&url=http%3A%2F%2Fwww.hardyspicer.com.au%2Frubber_s prings.asp&usg=AFQjCNGx8ZykPUAGIlHLKaeIDON_20-RSQ

They were an approved accessory by Land Rover back in the day.
https://www.google.com.au/url'sa=t&rct=j&q=&esrc=s&source=web&cd=4&cad=rja&uact=8&ved=0ahUKEwiOh7eU9NnUAhVDmJQKHUYPCXoQFghHMAM&url=http%3A%2F%2Fwww.landrover.vlothuizen.nl%2Fsho w%2Flist%2F7031-1.html&usg=AFQjCNGt2DhFU-LbBRYgzwoaTDvf3uEn4g

Keith

[Bearman]

I had a set on my series 2a years ago out at Mt Isa Keith. They were standard on Toyota lite stouts I think. Anyhow I adapted it to fit the series. Took the rubber bump stop off and welded a bracket to the chassis which it bolted onto. Then welded another bracket with a locating pin on the axle housing flat spot. Worked a treat when carrying heavy loads. I still have the toyota part number for the rubber bit : 48302-39035