Electric brakes

[Mumfy1973]

Ok I need some advice I Have a Discovery 3 2005, Ive been reading the stickies at the top about Electric brakes

I have Redarc Towpro elite to fit Can i just wire this as i have done in the past

1. feed via a circuit breaker (so straight from battery)
2.Earth
3. feed from the brake switch
4. wire straight to the back of the socket for the electric brakes

I have read the diode bit but don't truly understand it, as its always concerning the prodigy unit, Can anyone help

[DiscoJeffster]

The diode is important. I suggest you read that bit and implement it as described in the sticky. Worked for me

[LRD414]

As Jeff says but also don't take feed from brake switch. Sticky explains what to do for brake signal.