Reply With QuoteThe diode is important. I suggest you read that bit and implement it as described in the sticky. Worked for me
Fossicker
SupporterOk I need some advice I Have a Discovery 3 2005, Ive been reading the stickies at the top about Electric brakes
I have Redarc Towpro elite to fit Can i just wire this as i have done in the past
1. feed via a circuit breaker (so straight from battery)
2.Earth
3. feed from the brake switch
4. wire straight to the back of the socket for the electric brakes
I have read the diode bit but don't truly understand it, as its always concerning the prodigy unit, Can anyone help
Darren
Landrover Discovery 4 The tow horse
2010
IID Gap Diagnostic
Landrover Discovery 2 TD5 (sons project !!!mad!!)
2002
Nanocom
Landrover Discovery 3 .....Gone not forgotten, Discovery 2001 td5...gone, Discovery 2A v8....gone, Discovery 2000 gone
TopicToaster
SubscriberThe diode is important. I suggest you read that bit and implement it as described in the sticky. Worked for me
2010 TDV6 3.0L Discovery 4 HSE
2007 Audi RS4 (B7)
Super Moderator
SubscriberAs Jeff says but also don't take feed from brake switch. Sticky explains what to do for brake signal.
D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
Link to my D4 Build Thread
D3 2005 V8 Petrol
Ex '77 RRC 2 door. Long gone but not forgotten.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks