Log in

View Full Version : Donaldson Air Filter



Paultan
1st September 2017, 11:45 AM
I have a FFR Perentie and have installed a KLR turbo into it. The air filter housing was modified, and the boys at KLR have told me that I should install a Donaldson air Filter part no. P90-0611. The problem is that there are absolutely none in NZ!!

I did a search an found a post stating that a Fleetguard AF4059K could be a replacement, but this was for a RRC, not a Perentie, so not sure if it would work (plus am finding it hard to source that part in NZ as well!)

Is there a replacement to the Donaldson P90-0611 that I could use?? Any pointers will be muchly appreciated !

Cheers
Paul

Gordie
1st September 2017, 11:52 AM
I have fleetguard AF4059K outer air filter, and AF988 inner air filter on my Isuzu County. I am 99% sure perentie is same. Try a truck parts retailer.

Paultan
1st September 2017, 11:59 AM
Have continued my search and have looked through the Sakura website. It returns a air filter part number FA-8552 - has anyone used / seen this. From the pictures it doesn't quite seem right.

Gordie
1st September 2017, 12:00 PM
BTW...I cross referenced off Donaldson P90-0433. And the filter measures 380x155 if that is any help for comparison.

Gordie
1st September 2017, 12:03 PM
Oops, just re-read your post, your filter housing has been changed, disregard what I said!

BadCo.
2nd September 2017, 02:07 PM
Hey Paul, I think you are after a 6x6 filter

Filter Kit to service Ex-Army Land Rover Perentie 6 x 6 | eBay (http://www.ebay.com.au/itm/Filter-Kit-to-service-Ex-Army-Land-Rover-Perentie-6-x-6-/122487951575?hash=item1c84d9d0d7:g:ZFQAAOxymwBSOlK r)

Or you could just modify a standard one like I did

https://www.aulro.com/afvb/images/imported/2017/09/16.jpg

Bearman
8th September 2017, 07:12 PM
I have a FFR Perentie and have installed a KLR turbo into it. The air filter housing was modified, and the boys at KLR have told me that I should install a Donaldson air Filter part no. P90-0611. The problem is that there are absolutely none in NZ!!

I did a search an found a post stating that a Fleetguard AF4059K could be a replacement, but this was for a RRC, not a Perentie, so not sure if it would work (plus am finding it hard to source that part in NZ as well!)

Is there a replacement to the Donaldson P90-0611 that I could use?? Any pointers will be muchly appreciated !

Cheers
Paul

Yes that is the 6x6 filter. Same filter as the 4x4 except the cyclone plastic bit is on the other end.

BadCo.
8th September 2017, 07:40 PM
Yes that is the 6x6 filter. Same filter as the 4x4 except the cyclone plastic bit is on the other end.Which can be achieved by removing the cyclone bit and putting it on the other end :)