Rear Damper top nut

[JDNSW]

Looking for a noise in the rear suspension of the County today, found the nuts on the top of both rear dampers were about a turn loose. To save removing one to see what size and thread they are, does anyone know off hand? (I want to fit new self locking nuts)

[Red90]

M12.

You can figure it out from the part number. NY112041L. The "12" in the middle is the size. Or you could Google the part number...

[Rick]

I just recently replaced the rear shocks on my "95 110. I assumed the top nut and the nut that came with the Bilsteins were the same. Nope, only after getting the top nut on a turn and bit did I realize. I'm pretty sure the top bracket is 12 x 1.5 and the shock stock was 12 x 1.25

Rick

[clive22]

I agree. I've had a few different shocks on my County over the years some are M12 Course, but some have been M12 Fine.

If you work with nuts a bit you can easily see the difference.

Clive

[Rick]

John, I hope I didn't give you a bum steer. I just checked and the top nut is 12 x 1.75 on mine.

Rick

[JDNSW]

I haven't got the replacements yet. But it sounds like I might do well to pull a nut off and measure the pitch!