PDA

View Full Version : Joining multiple cables.


loanrangie
13th March 2018, 12:27 PM
I have the need to join 3 pairs of 6mm auto cable (4.59sqm), is there a compact junction box or terminal system for this situation ?
l00kin4
13th March 2018, 01:46 PM
Depends on the application and location a bit but I like this type: CABLE JOINERS TO SUIT 8B&S CABLE 8mm hole battery cable 12v wiring 4x4 E55-0380 | eBay (https://www.ebay.com.au/itm/CABLE-JOINERS-TO-SUIT-8B-S-CABLE-8mm-hole-battery-cable-12v-wiring-4x4-E55-0380/121099081345?epid=1864848026&hash=item1c32115681:g:4GEAAOxyPLpRdMT0)

Soldered with heatshrink over the top

David
loanrangie
13th March 2018, 02:09 PM
What i need is more for a Y shape cable arrangement so joining 3 pairs of cable, for just 2 i would use a screw terminal strip but 2 x 6mm wont fit.
Not sure if these will work as it says for solid conductors up to 4mmsq.

3 Way Red WAGO PUSH WIRE Connector | Jaycar Electronics (https://www.jaycar.com.au/3-way-red-wago-push-wire-connector/p/HM3233?utm_campaign=redirect&utm_source=HM3190r&utm_medium=web)
theelms66
13th March 2018, 02:35 PM
Connectors are all good but you cant beat soldering together. If your running 6mm i assume you are running reasonable current. Crimp and screw type connectors can invite corrosion and faulty joins . Tin your three cables separately, place 2 cables one side and the third onbthe other.then use one strand of wire and wrap it tightly around the three .then just heat the join , insulate. Done
PhilipA
13th March 2018, 03:39 PM
Jaycar do a gold terminal block which takes 1x4 SWG input cable and up to 4 x8SWG terminals.
You don't have to use the input just some of the outputs.
Gold Power Distribution Block - 1 in 4 out | Jaycar Electronics (https://www.jaycar.com.au/gold-power-distribution-block-1-in-4-out/p/HC4020)
I have had one for the past 5 years to distribute power around the back of the car.
I reckon it is neat and gives expansion room.

Regards Philip A
loanrangie
13th March 2018, 03:59 PM
Jaycar do a gold terminal block which takes 1x4 SWG input cable and up to 4 x8SWG terminals.
You don't have to use the input just some of the outputs.
Gold Power Distribution Block - 1 in 4 out | Jaycar Electronics (https://www.jaycar.com.au/gold-power-distribution-block-1-in-4-out/p/HC4020)
I have had one for the past 5 years to distribute power around the back of the car.
I reckon it is neat and gives expansion room.

Regards Philip A

Perfect, thanks Philip. I did look thru the jaycar site but didn't come across them.
sierrafery
13th March 2018, 08:04 PM
When i had to join 3 cables i used this type: KnightsBridge 3 Core IP68 3 Way Waterproof Cable Joint | Electrical World (https://www.electricalworld.com/en/KnightsBridge-IP68-3-Way-3-Core-5-14mm-In-Line-Waterproof-Cable-Connector-Joint/m-1852.aspx)
loanrangie
15th March 2018, 11:45 AM
When i had to join 3 cables i used this type: KnightsBridge 3 Core IP68 3 Way Waterproof Cable Joint | Electrical World (https://www.electricalworld.com/en/KnightsBridge-IP68-3-Way-3-Core-5-14mm-In-Line-Waterproof-Cable-Connector-Joint/m-1852.aspx)

A bit overkill for my needs.
I'd rather a mechanical joint in this size of cable as soldering is not easy with thick cable.