PDA

View Full Version : Need an ECU



strangy
18th April 2018, 05:54 PM
For some reason I started up today and moved out of the car park, spluttered cleared and spluttered again.
Plugged in Nanocom and ECU thought it was overboosted.
Clear faults but no joy and then no more comms with ECU.

Swapped the ECU out to mates D2 and same issue[bigsad].ie the fault remained with the ECU and symptoms then displayed on mates car.
No comms and stupid thing is randomly switching the fuel pump on/off along with indications of glow plugs and MIL.
Its not an oil in the plug or ECU related issue.
The ECU is misbehaving and best I can understand, thinks its in an overboost state from the outset.

So anyone with a NNN000130 or NNN500030 ECU please let me know. I have posted in wanted also.

weeds
18th April 2018, 06:04 PM
If there was no change when you swapped ECU’s than would this suggest the problems is elsewhere?

strangy
18th April 2018, 06:07 PM
If there was no change when you swapped ECU’s than would this suggest the problems is elsewhere?
I should edit my post[wink11] The problem went with the ECU over to mates car.

discorevy
18th April 2018, 06:59 PM
no oil , moisture , obvious damage to circuits ?

strangy
18th April 2018, 07:06 PM
no oil , moisture , obvious damage to circuits ?
No, spotless and dry inside.

weeds
18th April 2018, 07:44 PM
I should edit my post[wink11] The problem went with the ECU over to mates car.

Whoops, I looks like I didn’t read it right

Bazzle218
18th April 2018, 09:32 PM
I have a spare one is it manual or auto

strangy
18th April 2018, 09:52 PM
Auto