PDA

View Full Version : 12V output 2nd row charging points fuses



Mac_and_Cheese
10th July 2018, 08:45 AM
Hey all,

For those of you that have played around with the fuse boxes on the D5s; are the 12v outputs in the centre console fused separately from the 12v outputs in the dashboard?

I ask because I recently lost all output from every 12v output other than the one in boot, when I took it into Land Rover they said it was just a fuse that had blown. When they replaced the fuse, the dash outputs came back to life but not the 3 in the centre console. They tried to blame it on the UHF radio I had installed by a reputable installer.

Just hoping to get the facts before this turns into a blame game between LR and the radio installer.

Thanks in advance,

Tom

greg-g
10th July 2018, 02:30 PM
They have probably replaced fuse 1, the rear accessory socket is on fuse 3
As they are independent fuses I don't see why both would have blown.
I've attached the junction box fuse layout
I've sent you a PM.
Greg

Mac_and_Cheese
18th July 2018, 07:49 AM
Thanks Greg, that's a huge help



As they are independent fuses I don't see why both would have blown.

Greg

Ah, yeah, that may have been my fault. Was using a 12V inverter to charge my laptop while on a trip, worked fine the first time I used it.

Unfortunately when it stopped working the second time a tried in a different socket [bighmmm]

Lesson well and truly learnt