Disco 3 Exterior Door trim location.

[Aussie Jeepster]

Can anyone give me some measurements so I can put the door trim on my D3.
Perhaps a measurement from the bottom door edge to the bottom of the trim?
Thanks.
Alan
146001

[swarover]

Just measured the gap on my D3 S, bit variable for what I thought was factory fitted [bighmmm] The bottom of the strips is between 50 and 58mm up from the longitudinal panel crease along the lower part of the doors; and between 125 and 133 mm up from the top of the plastic trim along the bottom of the doors (below the panel crease).

Hope that helps,

Nathan

[swarover]

Meant to add that I reckon the gap between trims is supposed to be an even 125mm, and 50mm above the door panel crease to the bottom of the upper trim.

[Aussie Jeepster]

Great - thank you. I'm hoping mine will be straight!