View Full Version : Def 130 + Trayon Height
isuzu110
13th February 2019, 07:58 PM
Hi Folks
Looks like I'm buying a Dual Cab Trayon to put on a 130. For those who have one mounted on a 130, would you mind helping me with a few measurements please
Height to top of Trayon, including top channel
Tray height from ground
Height of Drawers under Trayon
Suspension Lift
Tyre size
My carport is 2.4M high, on a steep slope. I am expecting to have to modify it, but probably can't go much beyond 2.5m. I'd like to mount the spare under the tray
Any pics of your 130s from the rear would be appreciated.
Thanks
Rod
isuzu110
14th February 2019, 03:28 PM
Thanks to SLT who replied via a PM that his was 2.25m high
Looking forward to any other replies
Thanks
weeds
14th February 2019, 04:40 PM
Ranga should pipe in soon......he has a 130 with trayon.
isuzu110
14th February 2019, 04:47 PM
Thanks, I spoke to Ranga on the weekend, and he was very helpful. His rear air suspension sounds great. I was after feedback from people who had a stock suspension if possible
Ranga should pipe in soon......he has a 130 with trayon.
strangy
14th February 2019, 04:53 PM
Not having a go here.
This will be easier for you do the measuring/ math yourself.
I recall the trayon measurements are on the site.
The height is different on all traybacks unless fitted by the same body builder and even then probably some variances.
Suspension height, tyre size and tray height are unfortunately irrelevant from any other vehicle, but yours. Tyre manufacturer and pressures alone will change your height by 20-25 mm.
When you’ve figured your final tray height after suspension and tyres, allow another 50mm to compensate for loaded vs unloaded.
The ho har's
14th February 2019, 05:19 PM
And no we don't own a Trayon ours is self built.
weeds
14th February 2019, 05:55 PM
Thanks, I spoke to Ranga on the weekend, and he was very helpful. His rear air suspension sounds great. I was after feedback from people who had a stock suspension if possible
Pretty sure Ranga has standard front suspension, therefore the bags on the rear would only be inflated to level the car which would be similar to coils.
isuzu110
14th February 2019, 09:43 PM
Yes, I have the trayon measurements, but I don't own a 130 to measure, hence the questions. Thanks all for the info so far.
Not having a go here.
This will be easier for you do the measuring/ math yourself.
I recall the trayon measurements are on the site.
The height is different on all traybacks unless fitted by the same body builder and even then probably some variances.
Suspension height, tyre size and tray height are unfortunately irrelevant from any other vehicle, but yours. Tyre manufacturer and pressures alone will change your height by 20-25 mm.
When you’ve figured your final tray height after suspension and tyres, allow another 50mm to compensate for loaded vs unloaded.
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.