Air strut valve

[loanrangie]

I need to release air from one strut , do I need to undo the airline on the strut or valve block or somewhere easier ?

[DiscoJeffster]

Gap IID can deflate the system. Presuming you don’t have access to one?

[loanrangie]

Gap IID can deflate the system. Presuming you don’t have access to one?I have one but not registered it yet so don't have full functions.

[Graeme]

Last that I knew, the Gap tool only deflated all 4 corners which didn't suit my need.

Unscrew either the connector at the air strut or at the valve block whichever is less inconvenient until air starts leaking at a reasonable rate then wait until the flow decreases to very little before unscrewing completely.

[loanrangie]

Did it at the valve block as it was easiest to access, job done along with an oil/filter change.