Front crank oil seal?

[Summiitt]

Hi, Whats involved in changing the front crank seal? Mine is dripping pretty well from behind the harmonic balancer..52 80"

[1950landy]

This may help , it tells you how to remove the timing cover. I think the seal goes in from the back ( can't remember been a long time) it is easer to get the seal out with the cover off. 164065 164066 164067 Seal is item 3 . Check the seal surface on the harmonic balancer you may need to fit a speedy sleeve available from bearing company's . If you take the cover , harmonic balancer & old seal to them so they can measure they should be able to supply the seal as well. Sorry about the parts list being up side down , I inverted it but it turned again,
Hope this is of some help.

[Summiitt]

Thanks mate,

Thats perfect, cheers


This may help , it tells you how to remove the timing cover. I think the seal goes in from the back ( can't remember been a long time) it is easer to get the seal out with the cover off. 164065 164066 164067 Seal is item 3 . Check the seal surface on the harmonic balancer you may need to fit a speedy sleeve available from bearing company's . If you take the cover , harmonic balancer & old seal to them so they can measure they should be able to supply the seal as well. Sorry about the parts list being up side down , I inverted it but it turned again,
Hope this is of some help.

[whitehillbilly64]

Hi Summiitt
Manuals here. Free downloads.
Land Rover Manuals (http://smithies.co.nz/land_rover/)
I printed out the 3, 80inch ones. Operators manual, workshop manual and parts manual, one wet, cold day.
1,000 odd pages.
Paper, ink, plastic sleeves, folders, came in around $50

whitehillbilly

[1950landy]

That is about the cost of one of the books :thumbsup: