PDA

View Full Version : Help needed on Steering Column UP/DOWN IN/OUT motor diagnosis



vk5cp
12th September 2020, 03:24 PM
Hi all,

My steering wheel column motors have stopped working (both at once which is odd). I have checked fuse F20 and seems to be OK. I have a GAP IID tool and don't get any relevant faults.

Is there a way to use the GAP IID tool to check the motor operation? Or any other alternative diagnosis approaches?

My RR is a 2012 TDV8 Luxury but I think the motors are common to all the L322 range.

Regards

Chris

Laurie
12th September 2020, 05:31 PM
Check fuse 23 also, not sure if this is for all models though.

Laurie

Graeme
13th September 2020, 06:34 AM
No fuses involved on MY10-12, only fusible links 2, 3 & 4 with 3 providing power to the fets that switch power for the motors.

The switch uses a common earth for its 4 functions so that earth could be faulty.

glenhendry
28th April 2021, 06:40 AM
I thought my motors were gone too, but I discovered if I unlocked car with my 2nd key fob that it puts thew seat and mirrors and steer column to "user 2" settings and the column moves! So, it can't be the motors? It must be the stalk? I am yet to take the column cover off to investigate.