Looking for P38 parts

[P38dan]

Could I please ask you guys fro help, I am trying to purchase 4ea radiator to cooler bush, p/n ESR466, I strike out at every turn, I would settle for aftermarket if I could find some, any info or advice on where I might be able to purchase would be appreciated.

[bruceph]

Hi,

I know this is probably not much help, but the new part number for the ESR466 is PCG100370 ESR466 - Land Rover Bush-oil cooler to radiator mounting | Jaguar Land Rover Classic Parts (https://parts.jaguarlandroverclassic.com/esr466-bush-oil-cooler-to-radiator-mounting.html)

Have you tried KarKraft - 9 Egerton Street Silverwater NSW 2128 (02) 9737 9944

They have had some odd bits in stock I have found in the past.

Hope that helps.

Cheers,
Bruce

[p38arover]

I checked BMI and they didn’t have either part no.

I don’t even know what it looks like to be able to make suggestions.

[P38dan]

Hi bruceph and P38arover, thanks for the replies and greatly appreciate it, Yes I have the new part number and same issue with no stock anywhere, anyway on Monday I will be calling Karcraft and hope they have some or maybe more contacts, and yes every piece is information does help a lot, anyway again many thanks and my journey continues.
[bigsmile1]

[p38arover]

When I go out to KLR on Tuesday, I'll get them to check if it available from their UK supplier.

[P38dan]

Hi guys, I called KLR and Karcraft and struck out on both, seems that they have never had an inquiry about these mounts and therefore have never sold any, I will try a few more contacts in the UK but don't hold much hope, I purchased the P38 as an unfinished project and these mounts were and are missing so I don't even have an example, its a complete dilemma anyway thanks again for everyone's help and advice and my journey continues.

[grey_ghost]

Hi guys, I called KLR and Karcraft and struck out on both, seems that they have never had an inquiry about these mounts and therefore have never sold any, I will try a few more contacts in the UK but don't hold much hope, I purchased the P38 as an unfinished project and these mounts were and are missing so I don't even have an example, its a complete dilemma anyway thanks again for everyone's help and advice and my journey continues.

Try British Car Components in Melbourne - 03 9329 5766

I buy almost all of my LR parts there.

[old dirt bikes]

Hi Dan,
when I had the motor out of my P38 I also replaced the condenser and fitted an alloy radiator. Those mounts were pretty much passed their use by date, to put it nicely. From memory I tried to get new ones but no luck so I went through a box of shock absorber rubbers at my mates workshop and I found enough rubbers to make it all fit together. I will look what I have left in the shed tomorrow that might help you out.
Regards,
Alan Temperley

[P38dan]

OK guys thanks again, will check British car components tomorrow and if no luck will go to autobarn and try for some shockie rubbers, cheers.

[p38arover]

I had a look at the Allmakes site today and they could be available but the price was GBP11 each! (Genuine, not aftermarket.)

[prelude]

Perhaps this is not weird, car parts are getting really expensive and the P38 is over 20 years old so things are becoming unavailable... I mate of mine always says: better to expensive then not available at all!

Cheers,
-P

[P38dan]

I may have a solution to the radiator bushes and will confirm later as soon as I receive and try to modify some that I purchased, if successful I will post a photo, thanks everyone. And it seems that I am in contact with a group of people who know a lot more about the P38 Range Rover than I probably ever will and I would like to please ask for some more help, I have a P38 that I purchased as an unfurnished project, there are a lot of wiring harnesses that have been tampered with, I am in desperate need of the full wiring diagram or schematic for my 1995-P38, I have the trouble shooting manual and in fact was able to download the L322 wiring diagrams and pretty well everything except the schematics for the P38, any information is extremely well appreciated and even just comments are helpful.

[prelude]

I can't remember where I got mine but the P38 workshop manual is available online here and there That should be a good place to start!

Cheers,
-P

[P38dan]

For anyone interested I have located the wiring schematics that I was looking for my 1995 P38 Range Rover, this illustration was dated December 18 2000 and is listed as "1997 Land Rover Range Rover System Wiring Diagram" I have posted the link below which is a free download, the diagrams are 2nd from the bottom on page 17, this is a black and white copy and in A4 some of the writing is a bit hard to read, I usually print my schematics in A3 anyway and are a lot easier to read but still a little blurry in places, you can buy this online and in color and probably a lot clearer but I did not pursue it because this is all I needed.

https://cardiagn.com/wiring/page/17/

[bigsmile1]

Regards
P38dan.

[p38arover]

The Rangie page didn't display for me even with Adblocker turned off.

I assume the wiring diagrams are the same as the ETM (Electrical Troubleshooting Manual) tha is on the RAVE disc along with the workshop manual. See Range Rover P38a and L322 – Affordable Computer Repairs – DavecandoIT (https://davecandoit.com.au/wp/product/range-rover-p38a-and-l322/)

[P38dan]

Try opening it with Mozilla browser and it should open, I had the same problem with the other browsers and could only open it in mozilla.