View Full Version : Defender 300 tdi gear stick problem
jerryd
9th September 2022, 07:17 AM
The gearstick on my 1996 Defender has gone really sloppy and first and second gear seem to have moved 200mm to the left [bighmmm]
Reverse gear is impossible to find, I'm about to investigate by removing the gearstick assembly to have a look but not sure what I'm looking for. Can't find much info on google
The spring with the pin running through it isn't broken as suggested by M R Automotive
W&KO
9th September 2022, 08:43 AM
I had some silicate the other year, from memory there was a grub screw that held a shaft in place had come loose.
I pulled the top cover off.
A forum member helped me over the phone while o was stuck on the side of the road.
jerryd
9th September 2022, 05:03 PM
I had some silicate the other year, from memory there was a grub screw that held a shaft in place had come loose.
I pulled the top cover off.
A forum member helped me over the phone while o was stuck on the side of the road.
That was exactly the problem with this one, so an easy fix [bigwhistle]
I treated it to two new gear knobs also, it now changes gear like never before [smilebigeye]
BreakingBad
12th September 2022, 11:18 AM
Syncrogearboxes.com have a few Youtube clips which may help
Syncro Gearboxes - YouTube (https://www.youtube.com/syncrogearboxes)
Slickshift installation
Setting up the bias springs
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.